DRM Software Radio Forums  

Go Back   DRM Software Radio Forums > DRM Software Radio - User Forums > General Topics
User Name
Password
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 22-11-2014, 23:49   #1
AF4MP
Registered User
 
Join Date: Apr 2006
Location: Roswell, Georgia, USA
Posts: 10,294
Exclamation DRM on WBCQ 9330 kHz

Just heard "Timtron" on WBCQ say that they are planning to experiment with DRM on their 9330 kHz frequency. Stay tuned...
__________________
73,

-Zyg- AF4MP
3402' N, 8424' W
EM74ta
AF4MP is offline   Reply With Quote
Old 04-06-2017, 18:11   #2
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
Well, I definitely saw a 20 kHz, yes dual channel, digital signal which was centered on 15420 kHz today so I'm assuming this test originated from WBCQ. The signal was strongest as I rotated my magnetic loop from a NE to SW direction at my location. I haven't seen a signal this strong in the USA since RNZI reduced their broadcasts to the Pacific. This DRM signal lasted until ~ 1730Z.

Three years have elapsed since WBCQ began musing about the possibility of using DRM, but apparently the time has finally arrived. WBCQ, when you finally use DRM on SW, please, PLEASE use 16 QAM modulation for the Main Service Channel (MSC). Thank you.

Great! Apparently, DRM is nearing sufficient thrust to blast-off.

Last edited by tpreitzel : 04-06-2017 at 18:25.
tpreitzel is offline   Reply With Quote
Old 18-03-2019, 22:50   #3
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
Where's the Beef? Just, Do It!

Allan Weiner on Twitter today said "9330kHz will be cooking real soon" via their new 500kW station. Hopefully, Allan will broadcast some real meat via robust DRM ... Be sure to aim some 500kW blasts over Cuba while you're at it, Allan. The time for digital tests is loooooooooong past.

Last edited by tpreitzel : 19-03-2019 at 15:27.
tpreitzel is offline   Reply With Quote
Old 28-03-2019, 16:08   #4
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
When is "soon", Allan? I'm getting impatient! LoL Hopefully, you'll transmit increasing amounts of robust, 16 QAM digital on your new 500 kW SW station.
I'll be rather impatiently waiting.

https://twitter.com/AllanWBCQ/status...10190291357697
tpreitzel is offline   Reply With Quote
Old 23-04-2019, 12:22   #5
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
https://twitter.com/AllanWBCQ/status...58471362469888

The implication is analog on 9330 kHz, not digital yet, but some digital testing could be included in time. We'll see. Allan would have to clarify his comment to be sure. The lion is ready to roar.
tpreitzel is offline   Reply With Quote
Old 01-05-2019, 12:29   #6
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
https://twitter.com/AllanWBCQ/status...52742646132738

Here we go ... it's launch time for Godzilla of the Americas riding a 500 kW booster.
tpreitzel is offline   Reply With Quote
Old 03-05-2019, 12:22   #7
PhilipOneL
Registered User
 
Join Date: Oct 2014
Location: Eastern Newfoundland
Posts: 204
I'm hearing an AM signal of, I think, Brother Stair, or someone much like him, on 9330 kHz right now (1220 UTC Fri 3 May 2019). Here in downtown St John's it is weak and fades down to zero sometimes, but is quite intelligible on the peaks. No sign of a DRM signal on it.
PhilipOneL is offline   Reply With Quote
Old 03-05-2019, 13:53   #8
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
Thanks, Philip.

WBCQ must be running at a vastly reduced power output for their new station as they continue testing. Allan made an agreement with Stair to keep him on the air on their 50 kW station. I certainly hope that Allan does NOT extend that agreement to the 500 kW station. I'm still hopeful that Allan will broadcast some digital on their new 500 kW station so keep us posted as you can. I see an analog carrier at my location, but it's very weak. I'd guess WBCQ is probably testing at ~ 50 kW output on their new 500 kW station.
tpreitzel is offline   Reply With Quote
Old 03-05-2019, 13:58   #9
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
LoL... I just visited Allan's Twitter page and saw this post after posting my response to Philip. Indeed, WBCQ was testing at 50 kW on their new station yesterday. I'm still hopeful for some digital from this new station.

https://twitter.com/AllanWBCQ/status...99388908711937
tpreitzel is offline   Reply With Quote
Old 12-05-2019, 02:44   #10
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
************ WARNING: *****************************
Don't read further if controversial subjects bother you. Personally, I do NOT want to write it, but one of the most powerful SW stations on earth is at risk because of it. I'll tread as lightly as possible while stating a case which needs to be public IMO.

**************************************************

Allan Weiner,

Please consult a de-programmer for religious cults. You appear to be suffering from Stockholm Syndrome. I don't know RG Stair, but you evidently are a member of his cult whether intentional or not. RG Stair has apparently taken advantage of your love of the freedom of speech. Most leaders of religious cults mean well, but pervert the Gospel through a mixture of old and new testaments. Once indoctrinated into a religious cult, the only permanent means of exiting it is by a thorough knowledge of the closed canon. The closed canon MUST be thoroughly and carefully read in order to combat a perverse interpretation. I'm familiar with religious cults so my initial advice is to seek a de-programmer for religious cults and start reading the most accurate translation of the Protestant canon today. Don't delay as time only makes exiting such cults increasingly difficult. You'll wrongly think you're betraying God by leaving such a cult, but as long as you stay in the Word by reading it, life will be much happier and simpler as a result. I wish you the best, Allan, and I hope to hear sound religious programming on WBCQ one day via DRM. First, you must know what the latter is and cults take advantage of ignorance through misguided preaching. The need for preaching ended with the closed canon, but the need for reading the canon took its place.

Last edited by tpreitzel : 16-05-2019 at 18:00.
tpreitzel is offline   Reply With Quote
Old 14-05-2019, 16:07   #11
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
Apparently, the new Continental 500 kW transmitter recently installed at WBCQ does not currently have the necessary hardware to transmit DRM ... an absurd oversight for a new transmitter. Hopefully, this problem will be corrected. Sheer craziness...
tpreitzel is offline   Reply With Quote
Old 17-06-2019, 02:01   #12
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
On Wavescan, I heard two comments by Allan Weiner on their new 500 kW transmitter. In one statement, he implied that the transmitter is already DRM capable and in the other statement he implied that it will be. So, you decide if their new Continental 500 kW transmitter is capable of transmitting DRM.

Thankfully, we can assume it will be shortly capable of transmitting DRM if not already. If it is already capable, I'd like to see some tests of that capability.
tpreitzel is offline   Reply With Quote
Old 22-06-2019, 04:42   #13
Owdjim
Registered User
 
Owdjim's Avatar
 
Join Date: Jan 2003
Location: Marahau, Tasman Bay, New Zealand
Posts: 593
WBCQ running 500 kW today (June 22nd here in NZ). Massive signal into New Zealand. Would be nice to see some DRM at that level :-)

Cheers, Chris
__________________
Elad FDM-DUOr, KiwiSDR, FRG-100/DRM receivers + Wellbrook ALA1530S+ loop antenna
DRM receiver museum: CT Digital World Traveller, Morphy Richards 27024, Newstar DR111, Roberts MP-40, UniWave Di-Wave 100
My DRM webpage: http://www.owdjim.gen.nz/chris/radio/DRM/
My online receivers: http://radio.owdjim.gen.nz/
Owdjim is offline   Reply With Quote
Old 22-06-2019, 19:00   #14
AF4MP
Registered User
 
Join Date: Apr 2006
Location: Roswell, Georgia, USA
Posts: 10,294
Quote:
Originally Posted by Owdjim
Would be nice to see some DRM at that level

During the NASB convention last month the Continental Electronics rep, who sold the 500 KW transmitter to WBCQ, told me that the unit is not currently configured for DRM. It would require extra work and modifications for DRM use.

Interestingly WBCQ initially requested a 1 MW transmitter!
__________________
73,

-Zyg- AF4MP
3402' N, 8424' W
EM74ta
AF4MP is offline   Reply With Quote
Old 23-06-2019, 02:12   #15
tpreitzel
Registered User
 
tpreitzel's Avatar
 
Join Date: Apr 2012
Posts: 2,527
Quote:
Originally Posted by AF4MP
During the NASB convention last month the Continental Electronics rep, who sold the 500 KW transmitter to WBCQ, told me that the unit is not currently configured for DRM. It would require extra work and modifications for DRM use.


Apparently, there is some disagreement on this issue which definitely needs to be clarified.
tpreitzel is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is On
Forum Jump


All times are GMT. The time now is 15:13.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.