Degen DE31 active loop

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • dk8cb
    Roland
    • Mar 2004
    • 2748

    #31
    @ mitajohn

    I doubt a little that increasing the voltage to 15 V will still decrease the capacitance much further or at least sufficiently to reach 22 MHz.

    Roland

    Comment

    • mitajohn
      Registered User
      • Nov 2002
      • 8441

      #32
      Hi Roland,

      The DC/DC converter circuit does not work with any other 12, 13 or 15V Z-diode (if it is a zener) except the one installed. If we had a schematic would be helpful, but it's not worth trying. Any way the loop amplifier works up to 27 MHz and I checked it that it works very good up to 21475 kHz with some directivity and a lot of noise.

      John.
      Last edited by mitajohn; 2005-11-28, 17:33.
      Regards, John.

      Comment

      • Rene Schmitz
        Registered User
        • Dec 2004
        • 29

        #33
        Hi Mitajohn, Bernd and all,

        Thanks for the notes.

        It would seem that a deep null is better with a balanced loop. Could be interesting to duplicate the FET amplifier, and use a transformer for matching them to coax. Obviously the varicap would need to be made "floating" between the ends of the loop then.

        Cheers,
        René
        Elektor RX (mod), 5m Wire, Preselector

        Comment

        • dk8cb
          Roland
          • Mar 2004
          • 2748

          #34
          Originally posted by Rene Schmitz
          ... Could be interesting to duplicate the FET amplifier, and use a transformer for matching them to coax. Obviously the varicap would need to be made "floating" between the ends of the loop then.

          ...and the FETs would have to be matched as well, preferably as two on the same substrate.

          Roland

          Comment

          • df9rb
            Registered User
            • Jun 2004
            • 484

            #35
            Hello,

            during my last business trip to Japan I could receive the label of DW from Sines on 15440 with the Degen. With 3 m wire no reception was possible. Listening in AM the signal from the Degen was much less noisy than the 3 m wire, both mounted in the hotels window there in the center of Tokyo.
            The potentiometer of my 1st Degen has been broken before the trip. I replaced the broken potentiometer and contacted the seller in China for a fitting potentiometer. He offered me to send a new antenna without returning the defective one if I pay the postage. Now I have 2 Degen antennas and I would sell the repaired one (see attachment) only for the additional postage I payed. Since having repaired the DC-Box I miss a clamp to contact the batteries. Therfore replacing the batteries means to solder a little!

            Bernd, DF9RB

            Comment

            • jabi
              Registered User
              • Sep 2003
              • 4

              #36
              Any have the following pictures:



              Is impossible download for this page.
              73,s de Jabi, EA2ARU.

              Comment

              • simone
                simone
                • Jan 2003
                • 10144

                #37
                Hi jabi,

                I am not sure if Carsten still reads on the forum regularly, better send him a PM (username: carknue), maybe he still has the photos you are looking for.

                Simone

                Comment

                • carknue
                  Registered User
                  • Dec 2002
                  • 1321

                  #38
                  The links are working again.
                  regards, Carsten
                  AOR 7030 + Wellbrook ALA 1530P & DWT + Degen DE31 + TG33

                  Free DRM Tools for analysing, controling and automating your DRM reception and logging

                  Comment

                  • mvs sarma
                    Registered User
                    • Apr 2007
                    • 220

                    #39
                    Many thanks , carsten !! it is much useful for hobbyists. we get the concept. but the intervening telescopic which helps to make proper shape of the antenna, i doubt whether is is connected on any side to the antenna?
                    Regards,
                    Sarma
                    ------------------
                    Elektor SDR 5/07- Elektor Preselektor - Miniwhip Antenna of PA0RDT

                    Comment

                    • jabi
                      Registered User
                      • Sep 2003
                      • 4

                      #40
                      Pictures ok !

                      Pictures all ok. But, is possible, please, upload the circuit squeme for work (and play) with it?
                      Regards de from Bilbao, Spain, de Jabi, EA2ARU.

                      P.D.: I am looking the more little antenna for RX in the ham 40 mtrs. in my SOTA RX informations. Have aucun experience with the BAZ ferrite antennas for RX on 40 mtrs.?

                      Comment

                      • ianf
                        Registered User
                        • Mar 2012
                        • 299

                        #41
                        I use the Degen all the time with my Newstar, top tip, make sure Degen has really fresh batteries, it makes a big difference

                        Comment

                        • Linux-DRM
                          Registered User
                          • Jul 2011
                          • 177

                          #42
                          31MS

                          Although not normally a fan of active loops the Degen 31MS performs very well on shortwave and medium wave. I picked up VOCM on 590kHz, Sunday morning, not booming but good copy (using the antenna direct, not via the coupler). OK, VOCM is not that hard to pick up in the UK in the grand scheme of MW DX but still not bad for such a simple setup. I was using my trusty Ten-Tec RX320D at the time using an unattended recording setup to my ultra low powered UG802 mini PC running Ubuntu.

                          Cap
                          Cap

                          Radios: MR 27024, 2 x Tecsun PL-660, Eton G3 & E5, Tecsun PL-365
                          Antenna: Homebrew Magnetic Loop (3-30MHz)
                          Software: Dream v2.2 (svn924) on Ubuntu 14.04 LTS

                          Comment

                          • Braccini
                            Registered User
                            • Aug 2016
                            • 448

                            #43
                            Uniwave Diwave 100 + Sony Active Antenna ANLP 1

                            Excellent combination! Strong signal from All India Radio, Voice of Nigeria, listening in Brazil. It's amazing!
                            I listened too:
                            BBC WS to Cuba;
                            Vatican Radio to USA;
                            Radio Romania International to France;
                            Radio New Zealand International to Pacific.
                            Clint 73!
                            Francisco Braccini
                            DRM: Smart Radio for All!
                            YouTube DRM Channel: https://www.youtube.com/c/FranciscoBraccini

                            Comment

                            Working...
                            X